KNX/IP Interface VIVO

VIVO Spica

The KNX/IP SPICA KNX interface is a Tunneling device that allows to couple an Ethernet line with a bus KNX line. Thanks to its flexibility, the device can be used as programming interface through the IP Network (even remotely*) and it can manage up to four parallel connections which makes it suitable for use also as gateway for the supervision systems. Six LEDs show the exact status of the two connected lines; this helps identify common communication problems due to bus load or retransmissions on both lines. The device status can also be checked from a dedicated web page (accessible using the device’s IP address and the default port, e.g. 192.168.0.9:8080/). This device is powered by auxiliary power 30Vdc. *= Requires specific network level configuration (not dependent by Spica KNX device).

Catégorie	Valeur
Nom de l'article du catalogue	KNX/IP Interface VIVO
Nom du programme d'application	KNX/IP Interface Tunneling Gateway
Numéro de commande	VIVO Spica
Monté sur rail	Oui
Site web du fabricant	VIVO

KNX/IP Interface VIVO

Documentation technique

Appareils associés

Restez informé