Minipad - D01

The MINIPAD KNX pushbutton panel of the eelecta® series is equipped with 8 buttons that can be configured for the management of lights, shutters, dimmers, or other programmable command and control functions. There are also 8 white LEDs and one RGB, each freely configurable with ETS. In the rear part, 3 inputs are available, two of which are dedicated to interfacing potential-free contacts (clean – for example sensors, traditional buttons, etc.) and one freely configurable by ETS as a dry or analogue contact. The control panel includes a temperature sensor that can also be configured as a thermostat for the control of two distinct areas, both with integrated PI controller for piloting heating, cooling, valves, 6-way valves, fan coils 2 and 4 pipes. Moreover, 16 logic blocks are available to implement simple expressions with logical or threshold operator or complex expressions with algebraic and conditional operators; It is possible to use predefined algorithms as proportional controls of temperature and humidity or dew point calculation. The device also integrates the “Virtual Holder Logic”; the field of application is the hotel room: through a magnetic sensor installed on the door and connected to a digital input, accurate presence information is managed. The presence detection solution can deduce the presence of people in the room using one or more dedicated sensors. It also detects an unexpected presence and is able to differentiate more behaviours. The KNX communication interface is included. The device can be configured via the ETS application program.