SpaceLogic KNX Coupleur de rail DIN

This device from the Spacelogic KNX range is a DIN Rail Coupler used for logic connection and electrical isolation of lines and areas. The device supports KNX Security. This option can be activated in the ETS. As a secure line coupler, the device enables the forwarding of both secured and unsecured communication. In addition, access to the device itself (e.g. for a download) is protected by KNX Security. The device has a filter table (8k bytes) and ensures a galvanic separation between the lines. The coupler supports KNX longframes and is compatible with the ETS 5 software. This device comes with 2 integrated push-buttons for testing purpose and 3 status LEDs. It allows mounting on TH35 DIN rails according to EN 60715. The bus is connected using bus connecting terminals. The device can be used as an area/line coupler or as a repeater to form line segments in existing or new KNX systems. The function as a coupler or repeater can be parameterised. Functions as coupler - Use as a area or line coupler depending on the physical address. Reduction of the bus load through the filter function (filter table). Support of the full address area (Group 0-31) with filter function. Forwarding of individually addressed telegrams (subline to mainline, mainline to subline) can be parameterized. Forwarding of group telegrams (subline to mainline, mainline to subline) can be parameterized. Telegram repetitions in the event of transmission errors can be set separately for group telegrams, broadcast telegrams and physically addressed telegrams. Telegram confirmation for group telegrams and physically addressed telegrams can be parameterised separately. This device has functions as repeater and expansion of a line into segments. Telegram repetitions in the event of transmission errors can be set separately for group telegrams, broadcast telegrams and physically addressed telegrams. The width of the device for 1 module is about 18mm. This application requires ETS 5 or higher. The device is delivered with 2 bus connection terminals and 2 cable covers.