Spacelogic KNX Routeur IP de rail DIN

This device from the Spacelogic KNX range is an IP Router DIN Rail. The Spacelogic KNX IP Router allows the forwarding of telegrams between different lines through a LAN (IP) as a fast backbone. In addition, this KNX IP Router is suited to connect a PC to the KNX network e.g. for ETS programming. The KNX IP Router supports KNX Security, which can be enabled in ETS. As a secure router, the device allows the coupling of not secured communication on KNX TP to a secured IP backbone. For the interface functionality (tunneling) KNX security prevents unauthorized access. The router supports up to 8 tunneling channels. For each tunneling channel, a separate individual address must be configured. The IP address can be obtained by a DHCP server or by manual configuration (ETS) respectively. This KNX IP Router works according to the KNXnet/IP specification using the core, the device management, the tunneling, and the routing part. The Spacelogic KNX IP Router has an extended filter table for main group 0 to 31 and is able to buffer up to 150 telegrams. The Router is powered by the KNX bus. An additional power supply is not needed. The device is delivered with 2 integrated push-buttons for testing purpose and 3 status LEDs. It allows mounting for installation on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal. The LAN network is connected via the RJ45 socket. The width of the device for 1 module is about 18mm. This application requires ETS 5 or higher. The device is delivered with bus connecting terminal and cable cover.