Presence Detector PIR+UT Sensor H01

The Dual-Technology presence detector PDOOH01KNX integrates advanced PIR and Ultrasanic sensor technologies in one unit. The combination of these technologies helps to eliminate false triggering problems even in difficult applications. It is suitable for indoor application which is ideal for using in home, open-plan office, multi-stall public restroom, conference room, under-ground parking lots, classroom, library, etc. The control parameters time, ultrasonic sensor sensitivity, Lux and PIR/US triggering method of presence detector can be adjusted as user desired by ETS to match different application requirements. • For use in KNX (EIB), TP (twisted pair) bus system in conjunction with other KNX components. • Parameter and function settings via ETS 5 (Engineering Tool Software 5). • Unique design of upgrading the firmware on-line for convenient operation. • Status LEDs con be activated / deactivated. • Automatic presence- and brightness-dependent control for lighting and HVAC. • HVAC mode (O = automatic, l = comfort, 2 = standby, 3 = economy, 4 = building protection). • Can be used as fully or semi-automatic, switchable. • Switch or constant light control mode with standby function. • Parallel switching of multiple presence detectors (Master/Slave or Master/Master). • Detection and sending of current brightness level. • lntelligent Central-OFF function. • PIR & Ultrasonic sensors locking function. • Manual influence via external KNX push buttons possible. • Room correction factor setting for brightness measurement calibration. Triggering mode application examples: • PIR and US: If the precise detection is necessary, choose this triggering method which can reduce the false triggering problem. For example, a classroom, an open-plan office, etc.. • US only / PIR or US: When there is high leveI of minor motion or obstacle (furniture or partitions) existing in the monitored space, or it is a multi-stall space. For example, a multi-stall public restroam, an office with partitions, etc.. • PIR only: If the monitored space is free of obstacle or has high level of airflow or the detection area is needed to be well specified. For example, a small-scale office with air-conditioning, a small conference room, etc..