Dinuy Thermostat

ATTENTION: ETS application valid for versions S1.2 or lower (see the back of the product) · The new DINUY Touch Temperature Room Controllers are built on a functional evolution of the Laüka Capacitive Push Buttons. · Two different models are available : · TM KNT 001: with key for adjusting the fan speed of the fan coil. · TM KNT 002: with key for setting the HVAC operating mode. · Among their keys, there are 2 freely-configurable buttons, which can be configured as a Switch, Dimmer, Control of Blinds / Awnings, Scenes, etc. · The 2 freely-configurable buttons incorporate an RGB LED for pressing or state advice. · Incorporate a Display that shows both the Setpoint or Ambient Temperature and the Relative Humidity of the environment. · Built-in Temperature, Luminosity and Relative Humidity Sensors. · Their main functionality is complemented by 4 Binary / Analog Inputs, which can be connected to a Door / Window Sensor or a DINUY Temperature Probe. · They have 4 keys with preset functionality and 2 freely configurable ones. · No need external power, only the KNX Bus. · Flush-mounting design in universal mechanism boxes. · Programming and commissioning via ETS5 or later versions