EK-TO2-TP/EK-TI2-TP

EK-TX2
**ORDERING CODES** * EK-TO2-TP: KNX Secure card reader * EK-TI2-TP: KNX Secure card holder * EK-TD2-TP: KNX Secure door-side panel **DESCRIPTION** The EK-TO2-TP card reader allows for card reading simply by bringing the card close to the device—at a maximum distance of 20 mm—granting access based on configured authorizations. Equipped with a backlit display and an integrated KNX bus communication module, the device combines reliable performance with a refined design. It is powered by SELV voltage via the KNX bus and requires an auxiliary power supply of 12–24 Vac or 12–32 Vdc. Available in white or black, it is compatible with the Form, Flank, ‘NF, Deep, and Surface versions (featuring a 60 mm window), ensuring seamless aesthetic integration into any environment. The EK-TI2-TI card holder is designed to register occupancy when a transponder card is inserted into the slot located at the top of the unit. It is powered by SELV voltage via the KNX bus and requires an auxiliary power supply of 12–24 Vac or 12–32 Vdc. Available in white or black, it is compatible with the Form, Flank, ‘NF, Deep, and Surface versions (featuring a 60 mm window), ensuring seamless aesthetic integration into any environment. The EK-TD2-TP device is a door-side panel installed outside guest rooms in hospitality facilities; it communicates the status of the room to both guests and staff. TECHNICAL DATA Power supply: 30 V DC via KNX bus Auxiliary power supply: 12–24 V AC or 12–32 V DC Card reader with 13.56 MHz MIFARE RFID technology (for EK-TO2-TP and EK-TI2-TP models only) **SCOPE OF DELIVERY** The package includes a terminal for connection to the bus line, a plastic support for mounting on a round or square box (60 mm hole spacing), and two sets of screws. **ACCESSORIES** * EK-TCE-10 smart card (with black Ekinex® logo, pack of 10 cards) or EK-TCC-10 (customized with customer logo, upon request) * Square frame, Form or Flank version * Square cover plate with a 60 x 60 mm window * Plastic adapter **Versions** * EK-TO2-TP-B (black) * EK-TO2-TP-W (white) * EK-TI2-TP-B (black) * EK-TI2-TP-W (white) * EK-TD2-TP-B (black) * EK-TD2-TP-W (white) **FUNCTIONS AND FEATURES** **EK-TO2-TP** * Backlit display with symbols: * DND (Do Not Disturb, red LED) * MUR (Make Up Room, green LED) * RFID (not backlit; for EK-TO2-TP only) * RGB LED for general functions; doorbell button with white LED * Presence detection via bus and communication with a supervision system via KNX TP (twisted pair) bus * KNX Secure protocol * Guest management for hospitality facilities based on reservations and check-in/check-out periods; management of service staff access based on time slots and master (pass-partout) credentials * Programmable output, configurable based on card validation or as an actuator triggered by KNX telegrams Configurable delay upon card removal for courtesy light management * Two digital inputs available for connecting a traditional push-button (with switching, dimming, or shutter/blind control functions) or a signaling contact (e.g., window opening sensor) * Test mode for verifying LED operation * Logic, arithmetic, and comparison functions * “Virtual presence” function * Plastic enclosure * Climatic classification 3K5 (indoor, dry use) and mechanical classification 3M2 (according to EN50491-2) * Connection to the bus line via KNX terminal * Flush-mounted on a round/square wall box * IP20 protection rating (when installed) * Dimensions: 80 x 80 x 35 mm * Weight: approx. 50 g (including mounting support) **EK-TI2-TP** * General-purpose signaling LED * DND (Do Not Disturb) indicator with red LED and screen-printed label * MUR (Make Up Room) indicator with green LED and screen-printed label * Freely programmable general-purpose indicator using an RGB LED * Test mode for verifying LED operation * Logic, arithmetic, and comparison functions * RFID card reader * Relay outputs * Auxiliary output (Aux OUT) * Input for an external DND push-button * Input for an external MUR push-button * KNX Secure protocol * Plastic enclosure * Climatic classification 3K5 (indoor, dry use) and mechanical classification 3M2 (according to EN50491-2) * Connection to the bus line via KNX terminal * Flush-mounted on a round/square wall box * IP20 protection rating (when installed) * Dimensions: 60 x 60 x 41 mm mm * Weight approx. 50 g (including mounting support) **EK-TD2-TP** * Backlit display with LED symbols: DND (Do Not Disturb, red LED), MUR (Make Up Room, green LED), RGB LED for general functions, and a doorbell button with an RGB LED * Sends 1-bit and 1-byte commands, as well as "welcome" and "farewell" scenes, to the KNX bus upon guest entry/exit (configurable for the guest level) * Receives entry/exit notifications from the KNX bus via a 1-bit or 14-byte object (including card-level data), sent by an ekinex® reader, a Delégo system, or a third-party system * LED control via KNX communication objects * Supports KNX Secure protocol * Test mode for verifying LED functionality * "Virtual presence" function * Logic, arithmetic, and comparison functions * Plastic housing * Climatic classification 3K5 (indoor, dry) and mechanical classification 3M2 (according to EN 50491-2) * Connection to the bus line via a KNX terminal * Flush-mounted on a round or square wall box * IP20 protection rating (when installed) * Dimensions: 60 x 60 x 35 mm * Weight: approx. 50 g (including mounting support) **CONFIGURATION AND COMMISSIONING** A detailed description of the parameters can be found in the device's application manual. Configuration and commissioning require ETS5 or later versions. Application program for ETS: APEKTX2TP##.knxprod (where ## = version). Note: To implement specific access control functions for the reader and card holder, and for card programming, the ekinex® accédo software must be used. The following steps are required to commission the device: * supply power to the KNX bus * connect and activate the 12/24 V AC/DC auxiliary power supply (for EK-TO2-TP and EK-TI2-TP models only) * switch the device to programming mode by pressing the dedicated button located on the left side of the device (when viewed from the front). In this mode, the programming LED will be illuminated * download the physical address and configuration to the device using the ETS® software ** Note (for EK-TO2-TP and EK-TI2-TP models only)** : unlike other KNX devices, programming via ETS is only possible if both the bus power supply and the 12/24 V AC/DC auxiliary power supply are connected.
Kategorie Wert
Katalogartikelname EK-TX2-TP
Name des Anwendungsprogramms APEKTX2TP
Bestellnummer EK-TX2
Schienenmontage Nein
Website des Herstellers Ekinex S.p.A.