KNX Taster ERAi Serie

ORDERING CODE EK-ERA-TP, EK-ERA-TP-H DESCRIPTION The Ekinex® ERA series 1, 2, 4-button pushbutton combines refined design and advanced functionality for simple and customisable control. It allows you to manage lights, roller shutters and other KNX functions, distinguishing between short and long presses. The integrated temperature sensor expands the range of applications, making the device even more versatile. The RGB LEDs on each button provide discreet, configurable visual feedback. Designed for wall mounting in flush-mounted boxes, ERA is the ideal choice for those seeking elegance and technology in a single device. FUNCTIONS / FEATURES • On/off switching of single loads or groups of loads • Dimming of lighting devices • Control of motor drives (for roller shutters, blinds, curtains, etc.) • Measuring of room temperature and relative humidity detection (for EK-ERA-TP-H) through integrated sensors • Room temperature regulation • Logic functions • Sending of values (temperature, etc.) on the bus • Switching to forced functioning (lock) • Recalling and saving of scenes • Shift register function • Different functions programmable for short/long press of a button • Status feedback or orientation nightlight through programmable RGB LEDs TECHNICAL DATA • Power supply 30 Vdc from KNX bus line • Current consumption: 23 mA (typical) • Power from bus < 700 mW ENVIRONMENTAL CONDITIONS AND OTHER CHARACTERISTICS • Operating temperature: - 5 ... + 45°C • Storage temperature: - 25 ... + 55°C • Transport temperature: - 25 ... + 70°C • Relative humidity: 95% not condensing • Housing in plastic material • Wall installation in flush mounting box • Protection degree IP20 (installed device) • Classification climatic 3K5 and mechanical 3M2 (according to EN 50491-2) • Pollution degree 2 (according to IEC 60664-1) • Weight 48 g • Dimensions 89 x 89 x 32.5 mm (pushbutton body only) CONFIGURATION AND COMMISSIONING A detailed description of the parameters can be found in the device's application manual. ETS5 or later versions are required for configuration and commissioning. Application programme for ETS: APEKERATP##.knxprod (## = version).