Thermostat/Multisensor 4 Tasten | 4 ch - RGB Swiper

The KNX plastic multisensor OL-U in the Regular Version includes buttons and frames in painted plastic. The MO04A01KNX environmental sensor is a device of the OL-U® KNX® series for wall installation and is equipped with an LCD display with adjustable backlighting. The device integrates temperature, humidity and CO2 sensors and two 2-stage thermostats for the control of two distinct areas, both with integrated PI controller for piloting heating, cooling, valves, 6-way valves, fan coils 2 and 4 pipes.. The humidity sensor manages the reading of the relative humidity in the environment and allows threshold control with hysteresis of humidification and dehumidification devices. The device is equipped with 4 mechanical buttons (4 channels) for managing on/off commands, dimmers, rolling shutters and venetian blinds, or other programmable command and control functions. On the front side of the MO04A01KNX, there is a capacitive bar with swipe function for the implementation of programmable KNX functions. A freely configurable RGB Led bar is also available for displaying states or other quantities available on the KNX bus. Moreover, 32 logic blocks are available to implement simple expressions with logical or threshold operator or complex expressions with algebraic and conditional operators; it is possible to use predefined algorithms as proportional controls of temperature and humidity or dew point calculation. The device also integrates the “Virtual Holder Logic”; the field of application is the hotel room: through a magnetic sensor installed on the door and connected to a digital input, accurate presence information is managed. The presence detection solution can deduce the presence of people in the room using one or more dedicated sensors. It also detects an unexpected presence and is able to differentiate more behaviours. The OL-U® KNX® series is available in various colours and can be installed on a 2 or 3 module box and is compatible with the main standards (Italian, German, English, Swiss). The device can be configured via the ETS application program and can communicate with the KNX Data Secure protocol. The KNX communication interface is included.knx plastic switch.