KNX bus power supply 1280 mA with auxiliary output

DESCRIPTION The Ekinex® EK-AM1-TP power supply produces and monitors the 30 Vdc voltage required for operation of the KNX bus system. A coil integrated in the device decouples the power supply from the bus line. The output has overload and short-circuit protection. It has an additional 30 Vdc output that can be used for auxiliary supply of other SELV devices. The total current provided by the two outputs (KNX bus line and auxiliary power supply) cannot exceed 1280 mA. The device is capable of supporting short mains voltage interruptions (max. 200 ms). FUNCTIONS/FEATURES - Power supply of a KNX bus line with max. 256 bus devices connected - Auxiliary power supply 30 Vdc SELV - Reset of the connected bus line through pushbutton CONFIGURATION AND COMMISSIONING The power supply does not require configuration through the ETS® (Engineering Tool Software) program. The application program APEKAM1TP ##. Knxprod (## = version) is available to add the power supply in an ETS project. To commission the appliance, simply power the input power line to which the device is connected. The lighting of the green LED marked with "Vbus" indicates the regular operation of the device.