SpaceLogic KNX Interfaz IP de Carril DIN

This device from the Spacelogic KNX range is an IP Interface DIN Rail. The Spacelogic KNX IP Interface is an interface between IP and KNX. You can access the KNX Bus from every point of your LAN. The Spacelogic KNX IP Interface can be used as a programming interface for ETS 5 Software and allows to access the KNX bus over the Internet via a VPN. The device supports KNX Secure, which can be activated through ETS. With its interface functionality (tunneling) KNX security prevents unauthorized access. The device supports up to 8 tunneling channels. For each tunneling channel, a separate individual address must be configured. The device is delivered with 2 integrated push-buttons to select the tunneling channel and 3 status LEDs. The Interface is powered by the KNX bus. An additional power supply is not needed. It allows mounting on DIN rails TH35 according to EN 60715. The bus is connected using a bus connecting terminal. This application requires ETS 5 or higher. The LAN network is connected via the RJ45 socket. The width of the device for 1 module is about 18mm. The device is delivered with bus connecting terminal and cable cover.