ise e-charge II

**Electromobility in KNX Smart Home is possible with dynamic load management and SMART CONNECT KNX e-charge II.** # Features: **Integration of five charging points per device** * Different manufacturers can be used at the same time * Consumption values (current, power, energy, last charge and duration)¹ * States (connected, charging, charging completed, charging point state) * Start/stop and interrupt charging process¹ * Temperature value and temperature warning¹ * Information such as vehicle ID (EVCCID) and RFID tag¹ * Charging point fault messages **Integration of five solar inverters per device** * Different manufacturers can be used at the same time * Yield value (power, energy) * Status * Temperature * Solar inverter fault messages **Integration of one solar storage per device** * Current power and energy values (charging/discharging) * State of charge (SoC) * Status * Solar storage fault messages **General** * Static load management (SLM) integrated * Dynamic load management (DLM) integrated * NEW: Peak load management * NEW: Energy monitor * NEW: Section 14a EnWG (German Energy Industry Act)-compliant grid control (static/dynamic) * Integrated unbalanced load management * Prioritisation of charging points (switchable at runtime) * Various charging strategies (immediate, ECO) * Boost (fast charging) * Phase switching (1- or 3-phase charging)¹ * Fault messages from charging point and device * Integrated RS485 adapter and IP switch (2-gang) * KNX Secure * Completely configurable in ETS * Extensions via firmware updates ¹Manufacturer dependent