Besoin d'aide ?
Centre d'assistance
Boutique MyKNX
Logiciel ETS
Téléchargez ETS pour concevoir, mettre en service et gérer des projets KNX. Commencez par un essai gratuit ou choisissez une licence.
Applications ETS
Les applications ETS enrichissent votre flux de travail ETS grâce à des outils spécialisés pour la documentation, la mise en service, le diagnostic, et bien plus encore. Visitez notre boutique pour découvrir les applications ETS disponibles.
Image
Image
KNX TP Telegram Visualiser
Other in Roskilde
Applications utilisées
Éclairage
Chauffage, ventilation et climatisation (CVC)
Sécurité et sûreté
Commande et visualisation
Gestion de l'énergie / Comptage intelligent
Autre
Automatisation et accès à distance
Commande de stores et de volets
Détails du projet
| Catégorie | Valeur |
|---|---|
| Catégorie de projet | Other |
| Type de projet | Other |
| Année d'achèvement | 2026 |
| Taille du projet | 1 – 100 |
| Nombre d'appareils KNX utilisés | 1 – 25 |
| Supports de transmission KNX | Twisted pair |
| Heures-hommes | 1 – 100 |
| Main-d'œuvre | 1 – 5 |
Description détaillée
Energy Efficiency
The usage of automated functions already save energy in every installation. Especially the usage of KNX has a lot of potential for further energy savings, which can contribute to a better environmental footprint. Be extending KNX to more functions and applications, energy savings of up to 60% can be realised. Thanks to the flexibility of KNX, these functions can easily be implemented in this installation
Innovation
Smart homes and buildings are always an upgrade in comparison to a conventional installation. Not only automated functions and a higher level of comfort contribute to a higher living standard, but also the possibility to be ready for coming innovations. Thanks to the usage of KNX, the door has been opened to integrate new innovative solutions, using the worldwide STANDARD for home and building control.
Applications utilisées
- Éclairage
- Chauffage, ventilation et climatisation (CVC)
- Sécurité et sûreté
- Commande et visualisation
- Gestion de l'énergie / Comptage intelligent
- Autre
- Automatisation et accès à distance
- Commande de stores et de volets
Description des clients
This free, open-access web tool was created by a certified KNX Tutor to help Basic Course students visualise KNX TP telegram transmission, one of the most technically challenging topics in KNX education.
Students configure a telegram interactively: source and destination addresses, priority, DPT type, command, and acknowledgement type. The tool then builds every byte in real time, showing both the logical bit layout and the physical serial character as it appears on the bus, including start bit, LSB-first data, even parity, and stop bit. A live waveform renders the complete bus signal with authentic TP1 overshoot behaviour, T2 pause, LL acknowledgement, and T3 idle timing.
The visualizer also explains the difference between the raw TP bus format and the cEMI format seen in ETS Bus Monitor, a distinction that consistently confuses students.
Built on official documentation. Browser-based and freely available to any student or educator worldwide on https://marcdahl.dk/knx/
Coordonnées
| Nom de l'entreprise | marcdahl.dk |
| E-mail de l'entreprise | marc.dahl@gmail.com |
| Site web de l'entreprise | https://www.marcdahl.dk/ |
| Nom du contact | Marc Sonne Dahl |
| Fonction de contact | System Integrator |
