Stortingsgata 28

Office building in Oslo

Applications utilisées

Éclairage

Chauffage, ventilation et climatisation (CVC)

Sécurité et sûreté

Commande et visualisation

Gestion de l'énergie / Comptage intelligent

Autre

Automatisation et accès à distance

Commande de stores et de volets

Détails du projet

Catégorie Valeur
Catégorie de projet Office building
Type de projet Commercial
Année d'achèvement 2026
Taille du projet 5.000+
Nombre d'appareils KNX utilisés 1.000+
Supports de transmission KNX Twisted pair
Heures-hommes 1.001 – 2.000
Main-d'œuvre 1 – 5

Mis en vedette dans ce projet

ABB AG - STOTZ-KONTAKT
ABB AG - BUSCH-JAEGER
Gira Giersiepen GmbH & Co. KG
ise Individuelle Software und Elektronik GmbH

Description détaillée

Energy Efficiency

The usage of automated functions already save energy in every installation. Especially the usage of KNX has a lot of potential for further energy savings, which can contribute to a better environmental footprint. Be extending KNX to more functions and applications, energy savings of up to 60% can be realised. Thanks to the flexibility of KNX, these functions can easily be implemented in this installation

Innovation

Smart homes and buildings are always an upgrade in comparison to a conventional installation. Not only automated functions and a higher level of comfort contribute to a higher living standard, but also the possibility to be ready for coming innovations. Thanks to the usage of KNX, the door has been opened to integrate new innovative solutions, using the worldwide STANDARD for home and building control.

Applications utilisées

  • Éclairage
  • Chauffage, ventilation et climatisation (CVC)
  • Sécurité et sûreté
  • Commande et visualisation
  • Gestion de l'énergie / Comptage intelligent
  • Autre
  • Automatisation et accès à distance
  • Commande de stores et de volets

Description des clients

Stortingsgata 28 in Oslo was built in 1934, and consist of 20.000m2 buildingarea. KNX was chosen as the preferred system for controlling lighting when the building now has undergone a complete makeover. The lighting is controlled by means of KNX switches and movement detectors, and the KNX/DÀLI gateways controls the lighting in all of the areas. The movement detectors also controls water-valves in the toilet areas to prevent water leakage when the rooms are not in use. The communication to the buildings BMS system is done with IP interface, and the BMS system monitors and controls all of the building functions.

Coordonnées

Nom de l'entreprise Proel AS
E-mail de l'entreprise sjs@proel.no
Site web de l'entreprise http://www.proel.no
Nom du contact Stig Joar Sanden
Fonction de contact System Integrator