Escuela Ingenierías Universidad de Málaga

Educational in Málaga

Applicazioni utilizzate

Illuminazione

Riscaldamento, ventilazione e condizionamento dell'aria (HVAC)

Sicurezza e incolumità

Funzionamento e visualizzazione

Gestione dell'energia/Smart metering

Altro

Automazione e accesso remoto

Controllo di tapparelle e persiane

Dettagli del progetto

Categoria Valore
Categoria del progetto Educational
Tipo di progetto Commercial
Anno di completamento 2019
Dimensioni del progetto 1.001 – 5.000
Numero di dispositivi KNX utilizzati 26 – 100
Mezzi di trasmissione KNX Twisted pair
Ore-uomo 101 – 250
Manodopera 1 – 5

In evidenza in questo progetto

Zennio Avance y Tecnología s.l.
ABB AG - STOTZ-KONTAKT
Gira Giersiepen GmbH & Co. KG

Descrizione dettagliata

Energy Efficiency

The usage of automated functions already save energy in every installation. Especially the usage of KNX has a lot of potential for further energy savings, which can contribute to a better environmental footprint. Be extending KNX to more functions and applications, energy savings of up to 60% can be realised. Thanks to the flexibility of KNX, these functions can easily be implemented in this installation

Innovazione

Smart homes and buildings are always an upgrade in comparison to a conventional installation. Not only automated functions and a higher level of comfort contribute to a higher living standard, but also the possibility to be ready for coming innovations. Thanks to the usage of KNX, the door has been opened to integrate new innovative solutions, using the worldwide STANDARD for home and building control.

Applicazioni utilizzate

  • Illuminazione
  • Riscaldamento, ventilazione e condizionamento dell'aria (HVAC)
  • Sicurezza e incolumità
  • Funzionamento e visualizzazione
  • Gestione dell'energia/Smart metering
  • Altro
  • Automazione e accesso remoto
  • Controllo di tapparelle e persiane

Descrizione dei clienti

Control of natural and forced ventilation of common areas, depending on inside and outside temperature and CO2 values measured in 6 different zones on 3 levels each. Temperature, CO2 and humidity are measured with wireless sensors LoraWan and sent to KNX-IP Multicast. Gira-Homeserver converts the received data into opening values of motorized ventilation grills and speed of extractor fans. Depending on weather and outside temperatur , fresh air is taken either from north or south side of the building. The whole process is visualized and values are recorded in graphs. The ventilation system is part of an overall building control which will be entirely done in KNX and will control DALI lighting and A/C in aulas.

Informazioni sui contatti

Nome dell'azienda Klima Gaucin S.L.
Email aziendale info@klimagaucin.es
Sito web aziendale http://klimagaucin.es
Nome del contatto Klaus-Hermann Stubbe
Funzione di contatto