Stortingsgata 28

Office building in Oslo

Applicazioni utilizzate

Illuminazione

Riscaldamento, ventilazione e condizionamento dell'aria (HVAC)

Sicurezza e incolumità

Funzionamento e visualizzazione

Gestione dell'energia/Smart metering

Altro

Automazione e accesso remoto

Controllo di tapparelle e persiane

Dettagli del progetto

Categoria Valore
Categoria del progetto Office building
Tipo di progetto Commercial
Anno di completamento 2026
Dimensioni del progetto 5.000+
Numero di dispositivi KNX utilizzati 1.000+
Mezzi di trasmissione KNX Twisted pair
Ore-uomo 1.001 – 2.000
Manodopera 1 – 5

In evidenza in questo progetto

ABB AG - STOTZ-KONTAKT
ABB AG - BUSCH-JAEGER
Gira Giersiepen GmbH & Co. KG
ise Individuelle Software und Elektronik GmbH

Descrizione dettagliata

Energy Efficiency

The usage of automated functions already save energy in every installation. Especially the usage of KNX has a lot of potential for further energy savings, which can contribute to a better environmental footprint. Be extending KNX to more functions and applications, energy savings of up to 60% can be realised. Thanks to the flexibility of KNX, these functions can easily be implemented in this installation

Innovazione

Smart homes and buildings are always an upgrade in comparison to a conventional installation. Not only automated functions and a higher level of comfort contribute to a higher living standard, but also the possibility to be ready for coming innovations. Thanks to the usage of KNX, the door has been opened to integrate new innovative solutions, using the worldwide STANDARD for home and building control.

Applicazioni utilizzate

  • Illuminazione
  • Riscaldamento, ventilazione e condizionamento dell'aria (HVAC)
  • Sicurezza e incolumità
  • Funzionamento e visualizzazione
  • Gestione dell'energia/Smart metering
  • Altro
  • Automazione e accesso remoto
  • Controllo di tapparelle e persiane

Descrizione dei clienti

Stortingsgata 28 in Oslo was built in 1934, and consist of 20.000m2 buildingarea. KNX was chosen as the preferred system for controlling lighting when the building now has undergone a complete makeover. The lighting is controlled by means of KNX switches and movement detectors, and the KNX/DÀLI gateways controls the lighting in all of the areas. The movement detectors also controls water-valves in the toilet areas to prevent water leakage when the rooms are not in use. The communication to the buildings BMS system is done with IP interface, and the BMS system monitors and controls all of the building functions.

Informazioni sui contatti

Nome dell'azienda Proel AS
Email aziendale sjs@proel.no
Sito web aziendale http://www.proel.no
Nome del contatto Stig Joar Sanden
Funzione di contatto System Integrator