¿Necesitar ayuda?
Centro de soporte
Jack Links Guben
Manufacturer in Guben
Aplicaciones utilizadas
Iluminación
HVAC
Seguridad y protección
Operación y visualización
Gestión de la energía / Medición inteligente
Otro
Automatización y acceso remoto
Control de persianas y contraventanas
Detalles del proyecto
| Categoría | Valor |
|---|---|
| Categoría del proyecto | Manufacturer |
| Tipo de proyecto | Other |
| Año de finalización | 2025 |
| Tamaño del proyecto | 5.000+ |
| Número de dispositivos KNX utilizados | 301 – 500 |
| Medios de transmisión KNX | Twisted pair |
| Horas-hombre | 2.000+ |
| Mano de obra | 1 – 5 |
Presentado en este proyecto
Descripción detallada
Energy Efficiency
The usage of automated functions already save energy in every installation. Especially the usage of KNX has a lot of potential for further energy savings, which can contribute to a better environmental footprint. Be extending KNX to more functions and applications, energy savings of up to 60% can be realised. Thanks to the flexibility of KNX, these functions can easily be implemented in this installation
Innovación
Smart homes and buildings are always an upgrade in comparison to a conventional installation. Not only automated functions and a higher level of comfort contribute to a higher living standard, but also the possibility to be ready for coming innovations. Thanks to the usage of KNX, the door has been opened to integrate new innovative solutions, using the worldwide STANDARD for home and building control.
Aplicaciones utilizadas
- Iluminación
- HVAC
- Seguridad y protección
- Operación y visualización
- Gestión de la energía / Medición inteligente
- Otro
- Automatización y acceso remoto
- Control de persianas y contraventanas
Descripción de los clientes
The factory in Guben is controlled via KNX.
Lighting is managed via DALI, with switching handled by KNX on/off actuators.
Visualization is provided by the Gira Home Server.
Motion detectors are from Steinel.
Switches are Gira push-button sensors (Tastsensor).
In the production hall, surface-mounted switches with KNX binary inputs are used.
Each room is equipped with a temperature sensor. All information is sent to the BMS (Building Management System) via a BACnet gateway.
The BACnet gateway also controls KNX heating actuators (ABB).
RTR push-button controllers are used in the offices and directly control the heating actuators.
The blinds are controlled using ABB actuators.
Window opening is handled via a Schüco TipTronic gateway, with communication between both systems taking place via KNX.
Faults in the main distribution board are sent via binary inputs to both the BMS and the KNX visualization system.
