¿Necesitar ayuda?
Centro de soporte
American International School in Riyadh
Educational in Riyadh
Aplicaciones utilizadas
Iluminación
HVAC
Seguridad y protección
Operación y visualización
Gestión de la energía / Medición inteligente
Otro
Automatización y acceso remoto
Control de persianas y contraventanas
Detalles del proyecto
| Categoría | Valor |
|---|---|
| Categoría del proyecto | Educational |
| Tipo de proyecto | Commercial |
| Año de finalización | 2024 |
| Tamaño del proyecto | 1.001 – 5.000 |
| Número de dispositivos KNX utilizados | 501 – 1.000 |
| Medios de transmisión KNX | Twisted pair |
| Horas-hombre | 501 – 1.000 |
| Mano de obra | 6 – 10 |
Presentado en este proyecto
Descripción detallada
Energy Efficiency
The usage of automated functions already save energy in every installation. Especially the usage of KNX has a lot of potential for further energy savings, which can contribute to a better environmental footprint. Be extending KNX to more functions and applications, energy savings of up to 60% can be realised. Thanks to the flexibility of KNX, these functions can easily be implemented in this installation
Innovación
Smart homes and buildings are always an upgrade in comparison to a conventional installation. Not only automated functions and a higher level of comfort contribute to a higher living standard, but also the possibility to be ready for coming innovations. Thanks to the usage of KNX, the door has been opened to integrate new innovative solutions, using the worldwide STANDARD for home and building control.
Aplicaciones utilizadas
- Iluminación
- HVAC
- Seguridad y protección
- Operación y visualización
- Gestión de la energía / Medición inteligente
- Otro
- Automatización y acceso remoto
- Control de persianas y contraventanas
Descripción de los clientes
The American International School in Riyadh is one of the most biggest schools in the area, it contains of 13 buildings, 550+ thermostats for FCU & VAV.
The system was integrated with BMS system using KNX/BACnet IP gateway, and that allow to connect all the building in one network, and that allows to send the command throw the BMS software to the KNX system, and getting the feedback from the KNX and displayed by the BMS software.
And that was the main reason to make central control workstation for KNX & BMS in the same visualization software.
