¿Necesitar ayuda?
Centro de soporte
Bosch / Buderus office in Lviv, Ukraine
Office building in Lviv
Aplicaciones utilizadas
Iluminación
HVAC
Seguridad y protección
Operación y visualización
Gestión de la energía / Medición inteligente
Otro
Automatización y acceso remoto
Control de persianas y contraventanas
Detalles del proyecto
| Categoría | Valor |
|---|---|
| Categoría del proyecto | Office building |
| Tipo de proyecto | Commercial |
| Año de finalización | 2019 |
| Tamaño del proyecto | 101 – 500 |
| Número de dispositivos KNX utilizados | 1 – 25 |
| Medios de transmisión KNX | Twisted pair |
| Horas-hombre | 101 – 250 |
| Mano de obra | 1 – 5 |
Presentado en este proyecto
Descripción detallada
Energy Efficiency
The usage of automated functions already save energy in every installation. Especially the usage of KNX has a lot of potential for further energy savings, which can contribute to a better environmental footprint. Be extending KNX to more functions and applications, energy savings of up to 60% can be realised. Thanks to the flexibility of KNX, these functions can easily be implemented in this installation
Innovación
Smart homes and buildings are always an upgrade in comparison to a conventional installation. Not only automated functions and a higher level of comfort contribute to a higher living standard, but also the possibility to be ready for coming innovations. Thanks to the usage of KNX, the door has been opened to integrate new innovative solutions, using the worldwide STANDARD for home and building control.
Aplicaciones utilizadas
- Iluminación
- HVAC
- Seguridad y protección
- Operación y visualización
- Gestión de la energía / Medición inteligente
- Otro
- Automatización y acceso remoto
- Control de persianas y contraventanas
Descripción de los clientes
The office is located in an old boiler house where we have implemented the concept of an energy efficient office with minimal heat losses at the A ++ class level.
For the heating and cooling of the premises, a combined system was implemented where the main source is 2 Buderus WPL air-to-water heat pumps and Bosch Compress 3000 AWS with a capacity of 17 kW each. An additional source of heating is the cascade of condensing gas boilers Logamax plus GB172i, with a total power of 48 kW.
In addition, Logasol SKT 1.0 solar collectors are installed for hot water preparation. KNX control system with open protocol controls ventilation, heating and cooling, power consumption, office lighting and dynamically different areas of the building.
Gira visualization and Zennio button interfaces are used to control light and climate.
Lighting in the office area is maintained automatically by Jung sensors
The KNX Bosch-X10 module provides complete fuel control
Información del contacto
| nombre de empresa | IQdim |
| Correo electrónico de la empresa | iqdim.ua@gmail.com |
| Company Website | http://iqdim.com/ |
| Nombre del contacto | Roman |
| Función de contacto | Installer |
