IPI200 IP Interface

#IPI200 IP Interface
#KNXnet/IP Connections
EAE KNX IP interface supports the tunneling protocol and provides a data connection between the upper KNXnet/IP and the lower TP KNX bus line.

##General Specifications
- The KNX IP Interface 200 is a compact interface used to connect a PC to the KNX network. The connection is made through LAN (IP). Power is supplied via the KNX bus.
- The IP address can be obtained by a DHCP server or by manual configuration (ETS) respectively. This device works according to the
KNXnet/IP specification using the core, the device management and the tunneling part.
- The buttons are for diagnostic purposes. The LEDs indicate the operating status and communication errors on the bus.

The documents are available at the following link:

`https://www.eaetechnology.com/en/products/knx-products/system-devices/i…`