KNX-DALI-2 Gateway, 1-Fold

KNX-DALI-2 Gateway, 1-Fold as the interface between KNX installation system and DALI network,can realize communication between KNX devices and the DALI devices. For example, it can control switching, dimming, brightness value, colour temperature, colour control（RGB/RGBW/XY）, etc. of DALI devices, while the DALI gateway can request the status of the DALI device, failure detection, and convert the status and failure information into KNX telegrams, and send to the KNX bus. At the same time, we provide DCA tool for users to easily modify the address, test, and assign groups and scenes to the DALI device,etc. KNX-DALI-2 Gateway, 1-Fold can connect up to 64 DALI devices. Each DALI device can be controlled by a direct switching, dimming, or brightness value by using a KNX communication object. Currently supported device types are DT6-LED dimming control device, DT8-colour control device(including color temperature, RGB, RGBW, XY), DT7-relays module, DT1-Self-contained battery lamp,303 Presence Sensors, and 304 Motion Sensors. KNX-DALI-2 Gateway, 1-Fold has 16 different groups to be configured,assign DALI devices to groups via the DCA and switching, dimming control, colour control for each group; 16 DALI scenes are available for recalling,the brightness value of scenes are configured by the DCA; 8 DALI sensors are available for setting,enabling control with motion and brightness sensors; 8 behaviour templates for group and ECG action setting and a ECG configuration which can be modified by the DCA. KNX-DALI-2 Gateway, 1-Fold not only supports Group scenes or global scenes in DALI channels can be recalled via KNX scenes, but also supports broadcast control,switching, brightness, colour temperature, colour control for all DALI devices of a channel. Support the KNX Secure.